Hangzhou Hezi Technology Co., Ltd.
Technical Services
Hezi technology focuses on the research and development of "rapid seamless conveyor belt joint sleeve" innovative technology project
TECHNICAL SERVICE
Technical Services
Detailed introduction
Standard Specification for Tear-resistant Steel Wire Rope Lifting Rubber Belt
Release time:
2012-12-10
Standard Specification for Tear-resistant Steel Wire Rope Lifting Rubber Belt
| Standard specification of anti-tear steel wire rope hoisting rubber belt: | ||||||||
|
Tape strength (st-NO.) |
Wire rope to large
Nominal diameter(mm) |
Wire rope structure |
Rope spacing (mm) |
Standard work
pull(N/mm) |
Standard cover glue thicknessThicknesst(mm) | Bring heavy(Kg/m) | To small roller diameter(mm) |
Wire rope strength KN/根 |
| St-630 | 3 | 块96×7+IWS | 10 | 90 | 5×5 | 19.1 | 800 | 6.93 |
| St-800 | 3.5 | K6×7+IWS | 10 | 110 | 5×5 | 20.6 | 800 | 8.8 |
| St-1000 | 4 | K6×7+IWS | 12 | 140 | 6×6 | 24.7 | 800 | 13.2 |
| St-1250 | 4.5 | K6×7+IWS | 12 | 175 | 6×6 | 25.4 | 800 | 16.5 |
| St-1600 | 5 | K6×19+IWS | 12 | 225 | 6×6 | 26 | 1000 | 21.12 |
| St-2000 | 6 | K6×19+IWS | 12 | 285 | 7×7 | 30 | 1000 | 26.4 |
| experimental project | Performance | |||||||
| GB9770-2001 | DIN22131 | |||||||
| D级D | H级H | L级L | P级P | W级W | X级X | Y级Y | ||
| Tensile Strength | Mpa≥ | 18 | 25 | 20 | 14 | 18 | 25 | 20 |
| Elongation at break | %≥ | 400 | 450 | 400 | 350 | 400 | 450 | 400 |
|
Pull flower test(70℃、7D)
Tensile strength change rate
Change rate of elongation at break
|
% | -25~+25 | ||||||
| Abrasion | ≤ | 90MM3 | 120MM3 | 150MM3 | 200MM3 | 90MM3 | 120MM3 |
150MM3 |
Original author: Hangzhou efforts Rubber Products Co., Ltd.
Previous Page
Next Page
Previous Page
Next Page














